Curtis Controller, 1206 36V 350A, EZGo PDS, ITS Throttle
Curtis 350A PDS Shunt Controller
Curtis (1206) 350 amp, 36-volt controller with 4 buss bars is pre-set for E-Z-GO ITS throttle. For maximum performance, safety and durability 4 gauge cables throughout the car, heavy-duty solenoid and heavy-duty F&R switch are required.
Specifications:
- For use with EZGO TXT (Years 2000-2009)
- 350 Amp
- Throttle Input: ITS
- Tech Tip: Speed Chips are not compatible with this controller
OEM Manufacturer & Part Number:
- 609083 EZ
- 73326-G07 EZ
- 73326-G03 EZ
- 73326-G04 EZ
- 73326-G06 EZ
- 73326G02 EZ
- 73326G05 EZ
- 73326G03 EZ
- 73326G04 EZ
- 73326G06 EZ
- 73326G07 EZ
- 73326-G02 EZ
- 73326-G05 EZ
- CON-CT104 RH
- CON-RP77-EZGOSX
- CON-RB104
- 609083
- 73326G02
- 76-1206MX-4301
- 347
Mike L. –
Installed this Curtis 1206 36V 350A controller in my EZGO PDS, and it runs way better! Smooth acceleration, better torque, and easy install. Definitely a solid upgrade.
John T. –
Works great, but shipping took longer than expected. Once installed, my EZGO golf cart had much better power and responsiveness.
Steve M. –
This controller gave my EZGO PDS (2000-up) a whole new life. More torque, better hill climbing, and improved battery efficiency. Highly recommend it!
Brian S. –
Perfect replacement for my stock EZGO PDS controller. Plug-and-play install, and now my cart runs like a dream.
Paul D. –
The controller works, but I was hoping for more speed increase. Torque is better, but top speed didn’t change much.
Tom H. –
Big difference after upgrading my EZGO PDS 2000+. More power on hills and better acceleration. Fast shipping too!
Eric B. –
Works great, but needed some adjustments. My EZGO 36V now has smoother power delivery and improved battery life.
Greg P. –
It works, but I expected a bigger difference in speed. Torque is definitely better, though. Decent upgrade for my EZGO PDS.
Robert N. –
Replaced my old controller, and now my EZGO golf cart runs like new! Smooth acceleration and way more power.
Scott F. –
Good controller, but I had to reset my throttle settings. Now my cart runs much better, with improved torque and response.